Categories
broadband Engineer

Openreach – it’s all noise

openreach engineer up a poleOpenreach broadband engineer finds corroded pair up pole

It’s a complicated old game, broadband. Ethernet is far simpler. You connect a length of fibre to  router at one end and one way or another it gets back to a bigger router at the ISP’s core network somewhere and hooks you up to the internet/intranet/wherever you want to hook up to. I realise that’s a simplistic way of putting it but basically that is it. it doesn’t matter if it rains or blows a gale. Fibre doesn’t normally mind.

Broadband is different. Broadband is made up of copper cables, aluminium1  if you are unlucky. Even fibre broadband, as the BT marketing hypers like to call it, is not usually fibre. Fibre broadband is, unless you happen to be one of the few with Fibre To The Premises, carried over copper in the last critical few hundred yards to your house.

So fibre broadband, or Fibre To The Cabinet, has some copper. Now don’t get me wrong. I’m not complaining. Well actually I have been complaining. My home broadband performance had dropped right off from the 53Megs down and 11Megs up to at times a pathetic 6Megs in either direction.

Fortunately I have “a man who does” named Adam Rutter who leads one of our tech support teams. The BT System had rate adapted a line that could theoretically hit 80Mbps (I never expected it to do that – I am a few hundred yards from the cabinet). It normally does this if it finds errors on the line – the speed is adjusted to a point where the errors disappear. In my case the line was synching at 15Megs. Nogoode.

Adam knew there was something wrong and called out the cavalry in the guise of BT Openreach. The engineer arrived at the appointed time (good) and I hung around whilst he ran through some tests.

Now one thing you should know about a copper broadband line is that it was originally designed to carry your voice via analogue electrical signals. The specification for the copper telephone cable is therefore based largely on the parameters needed for your Aunty Mabel to hear your dulcet tones without having to put a bigger speaker in her hearing aid. Broadband hadn’t been invented in Aunty Mabel’s day (may she rest in peace).

When the boffs at the Post Office BT came along and said “Eureka we have read this article about something called ADSL and we think it is a good idea” they were stuck with a copper line that had a pre-Mabel date on it. That line spec, SIN349 for the purists amongst you, was designed to keep Mabel the inveterate talker happy on her Plain Old Telephone line and not Mabel the Skyper who loves to video conference with her nephews and nieces who in turn indulge their auntie because she shells out at Christmas and birthdays.

Now I’ve had Openreach out before to check my line and it has always passed their tests. This time I explained in no uncertain terms that there was something wrong – the evidence being in the speeds I was getting. I know it wasn’t congestion on our network and I also know how BT manages the capacity at the exchange so it wasn’t going to be down to congestion there.

Tim Drake, the Openreach engineer realised that there was no point in performing the normal line test – it would have passed. He got on the blower to their operations team and asked for the limits on my line to be lifted (the limits imposed to prevent line CRC errors).

My internet access speeds shot up, as expected.  However it didn’t take long for the errors to return. Tim spent the next hour or so testing the line looking for the source of the errors. He eventually found it at the top of the telegraph pole down the road from my house.

“Eureka” says I. Tim finished his stuff up the pole and brought down a piece of cable that showed corrosion on both strands of one pair. These wires, rubbing together in the wind and rain would have resulted in noise that was the cause of my errors and the speed downgrade. Mabel and her yakking on the Plain Old Telephone would not have been troubled by the problem. Mabel on Skype would.

My FTTC line is now back a lot nearer to where it needs to be and I am a happy bloke. I am next week having dinner with a senior team from BT and I intend to specifically commend Tim Drake for his efforts. Openreach broadband engineers have a budget of one hour to fix each problem.  Mine took two hours and Tim could have walked away early on in the process with the throwaway observation that the line was in spec and there was nothing he could do.

This he did not do and he now has a happy customer. He is a good man. He cares.

The only real answer to all this would be for a total network rollout of Fibre To The Premises. Whilst I am not saying that fibre is totally immune from the environmental problems that affect copper it is far less so. Ubiquitous FTTP ain’t going to happen any time soon, we all know that, but perhaps this blog will be used one day as an illustration of the issues that dogged that historical piece of communications antiquity, the copper telephone line.

Thanks Tim. The photo is of Tim up the pole.

Ciao.

1 That’s alue-min-eeum and not aloominum, y’awl

Trefor Davies

By Trefor Davies

Liver of life, father of four, CTO of trefor.net, writer, poet, philosopherontap.com

6 replies on “Openreach – it’s all noise”

My FTTC install happened in December 2011. It didn’t work properly for quite a few days, with the Openreach Engineer (same one each time, fortunately) eventually telling me that all the cabling in my area was Aluminium and the pair I was on was not actually a ‘pair’ (as in a nice balanced pair of wires twisted together) but two wires from two other pairs (oh joy). In the end it all stabilised but it won’t do any more than 36Mbps. Still, this is Ample for most people (including me).

If FTTP monthly charges were the same as ADSL I’d take it up right away.

It would be (insert supplier name here)’s interest as it would cut down on the copper content of the network a fair bit.

How many people know what their connection and/or speedtest speed is or even how to find it? Does the Infinity router show the connection speed?

Getting the xDSL frequency’s into SIN349 has been a personal crusade Trefor since I joined Zen, the fact the OTA and Ofcom don’t back this more fully and even worse UKGOV has parcelled off the protection of the frequency spectrum to a random part of the BBC with no powers, means it is pure miracle xDSL works as well as it does.

As an Industry I’m hoping as VDSL is about a ‘billion’ times more sensitive to interference that we can get some movement on this over next couple of years I will be championing this again with Openreach at the next available opportunity.

Mark – I will once it is available in my patch.
Somerset – I get it from our management systems but something tells me that you can also see it on your router.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.